Construction
Construction consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material.
As standard the Nano spa heater is supplied without any control circuit components, you can then select as many or as few options you would like from the extensive list of available options (below) – allowing complete flexibility and suitability to your requirements.
Options Available:
Minimum Flow Requirement | 1m³ (1,000-litres) per hour |
Maximum Flow Velocity | 17m³ (17,000-litres) per hour |
Heating Element | Titanium |
Flow Tube | BS 316 Stainless Steel |
Optional Control Thermostat |
0ºC > 45ºC (1.0ºC Differential) |
Optional Safety Thermal cut-out |
60ºC (Manual reset) |
Optional Flow Switch |
Gold tipped reed switch with Titanium fulcrum pin |
Wiring | High temperature, silicone sheathed, multi-strand copper conductors |
Seals | High temperature special formula polymer |
Working Pressure | 4 bar maximum |
Water Connections | 1½" BSP female thread |
Supplied ABS Unions | For 1½" / 50-mm rigid pipe |
Tüm ölçüler mm (All measurements in mm)
Diğer Özellikler | |
---|---|
Stok Kodu | 16015123018 |
Marka | ELECRO |
Stok Durumu | Var |
Garanti (Yıl) | 2 |